Archive for the ‘Draw-Tite Hitches’ Category

Draw Tite announces new Class III – 2″ Receiver Trailer Hitch for your 2007 – 2010 JEEP Compass

Sunday, April 3rd, 2011
Draw-Tite, part of the Cequent Manufacturing Company, has just created a brand new  Class III Trailer Hitch for the 2007, 2008, 2009, 2010 Jeep Compass.   Another in a long line of premium quality yet affordable towing parts, this one is designed to fit into a 2” Hitch Receiver.  They estimate that you can install this Class III hitch in approximately 15 minutes - without any drilling involved!  How great is that?!!!  This unit contains the hitch and all the installation hardware.  You will have to provide your own ball, mount, clip, and pin.

The hitch boasts a gross towing weight of 3,500 pounds, along with a tongue weight capacity of 350 pounds.  You may want to think about incorporating a classic looking hitch cover to keep the inside of the receiver clean and smooth, when you’re not towing anything, so the hitch will slide back in easily when you’re ready to go the next time out.  There are SO many great options out there to choose from, that you can’t go wrong with one of these!!

This Class III Hitch will support almost all standard weight towing demands – for example pulling your boat or camping trailer.  You can also easily tow your motorcycle, snowmobile, jet-ski, 4 wheeler, light watercraft, pop-up camper, or maybe a U-Haul trailer!  Furthermore, they are perfect for small business purposes, where you might be hauling yard work equipment or maintenance gear.

We have these available now at Hitches4Less.com. Visit our selection page associated with Draw-Tite Hitches – and enter Part # 75712 in the “SEARCH BY PART NUMBER” look-up towards the bottom of the page. 

If you are into or needing other auto gear to beef up your suspension, trannie, rear end, or whatever, you can also buy this hitch at Performance Parts 4 Less.com.  Use the hitch finder on the page by typing in the part number  where it says – KEYWORD SEARCH.  We sell a wealth of custom performance accessories that can help you do just about whatever you want to your rig.  Well worth checking out!

As soon as you’re prepared to head back out with your trusy boat or camper this spring, take some time and come see us first– at Hitches 4 Less.com - and let us help you get things rigged up properly.  We’re here to help you with virtually all your hitch and towing needs, including hitch balls, mounts, clips & pins, hitch covers, wiring harnesses, extenders & adjusters, jack stands, and a whole lot more.  There is no better time than right now to get things hooked up right for the fun season, now that Winter is finally over, and Spring is here!

Save on ALL your Towing Needs - at Hitches4Less.com

Draw Tite announces new Class I – 1 1/4″ Trailer Hitch for your 2011 Nissan Juke – AWD

Saturday, March 19th, 2011

The folks at Draw-Tite Hitch, a member of Cequent Manufacturing, have unveiled yet another quality towing product with their new Class I – 1 1/4″ Receiver Hitch.  Specifically built for your 2011 Nissan Juke AWD, this custom trailer hitch can handle a gross towing weight of 2,000 pounds, with a tongue weight of 200 pounds.  It fits a 1 1/4″ receiver, and comes with all mounting hardware and the drawbar, with pin and clip!

Installation is estimated at about 40 minutes, and requires no drilling or cutting.  A Class I Hitch will support most light weight towing requirements – such as pulling your motorcycle, snowmobile, jet-ski, 4 wheeler, light watercraft, pop-up camper, or even a U-Haul trailer!  You will need to provide your own electrical and hitch ball. 

These are now available at Hitches4Less.com.  Stop by and take a look at our page of Draw-Tite Hitches - and enter Part # 24867 in the “SEARCH BY PART NUMBER” lookup at the bottom of the page. 

You can also buy this hitch at PerformanceParts4Less.com.  Use the hitch finder on the page by typing in the part number  where it says – KEYWORD SEARCH.

So when you’re ready to start back out with your boat or camper this spring, be sure to come visit us first – at Hitches4Less.com and get things rigged up right.  We can help you with all of your hitch and towing needs, including hitch balls, mounts, clips, & pins, hitch covers, electrical, wiring harnesses, extenders & adjusters, jack stands, and so much more.  Now is the time to start getting things ready.  Those fish will be waiting!

H4L

Draw Tite unveils new Class I – 1 1/4″ Trailer Hitch for your 2010-2011 Volkswagen Golf Wagon

Saturday, March 19th, 2011

The folks at Draw-Tite Hitch, a member of Cequent Manufacturing, have unveiled yet another quality towing product with their new Class I – 1 1/4″ Receiver Hitch.  Specifically built for your 2010 or 2011 Volkswagen Golf Wagon ( Canada ), this custom trailer hitch can handle a gross towing weight of 2,000 pounds, with a tongue weight of 200 pounds.  It fits a 1 1/4″ receiver, and comes with all mounting hardware and the drawbar, with pin and clip!

Installation is estimated at about 40 minutes, and requires no drilling or cutting.  A Class I Hitch will support most light weight towing requirements – such as pulling your motorcycle, snowmobile, jet-ski, 4 wheeler, light watercraft, pop-up camper, or even a U-Haul trailer!  You will need to provide your own electrical and hitch ball. 

These are now available at Hitches4Less.com.  Stop by and take a look at our page of Draw-Tite Hitches - and enter Part # 24866 in the “SEARCH BY PART NUMBER” lookup at the bottom of the page. 

You can also buy this hitch at PerformanceParts4Less.com.  Use the hitch finder on the page by typing in the part number  where it says – KEYWORD SEARCH.

So when you’re ready to start back out with your boat or camper this spring, be sure to come visit us first – at Hitches4Less.com and get things rigged up right.  We can help you with all of your hitch and towing needs, including hitch balls, mounts, clips, & pins, hitch covers, electrical, wiring harnesses, extenders & adjusters, jack stands, and so much more.  Now is the time to start getting things ready.  Those fish will be waiting!