Archive for March, 2011

Check out this new Class I Trailer Hitch for your 2011 Nissan AWD Juke from Hidden Hitch

Sunday, March 20th, 2011

Our friends at Hidden Hitch, a member of the Cequent Manufacturing Company, have just come out with another high quality, yet economical towing product with their new Class I – 1 1/4″ Receiver Hitch.  Specifically built for your 2011 Nissan Juke AWD, this custom trailer hitch can handle a gross towing weight of 2,000 pounds, with a tongue weight of 200 pounds.  It fits a 1 – 1/4″ receiver, and comes with all mounting hardware and the drawbar, with pin and clip!  This great receiver hitch attaches right to the frame and the bumper, and is custom made to fit your AWD Juke!

Installation is estimated at about 40 minutes, and requires no drilling or cutting.  A Class I Hitch will support most light weight towing requirements – such as pulling your motorcycle, snowmobile, jet-ski, 4 wheeler, light watercraft, pop-up camper, or even a U-Haul trailer!  You will need to provide your own electrical and hitch ball. 

These are now available at Hitches4Less.com.  Stop by and take a look at store site - and enter Part # 60284 in the “SEARCH BY PART NUMBER” lookup at the bottom of the page. 

You can also buy this hitch at PerformanceParts4Less.com.  Use the hitch finder on the page by typing in the part number  where it says – KEYWORD SEARCH.

So when you’re ready to start back out with your boat or camper this spring, be sure to come visit us first – at Hitches4Less.com and get things rigged up right.  We can help you with all of your hitch and towing needs, including hitch balls, mounts, clips, & pins, hitch covers, electrical, wiring harnesses, extenders & adjusters, jack stands, and so much more.  Now is the time to start getting things ready.  Those fish will be waiting!

H4L

Hidden Hitch comes out with a new Class I Trailer Hitch for your 2009-2011 VW Jetta Sport Wagen

Sunday, March 20th, 2011

Our friends at Hidden Hitch, a member of the Cequent Manufacturing Company, have just released another high quality, yet economical towing product with their new Class I – 1 1/4″ Receiver Hitch.  Specifically built for your 2009, 2010, or 2011 Volkswagen Jetta Sport Wagen, this custom trailer hitch can handle a gross towing weight of 2,000 pounds, with a tongue weight of 200 pounds.  It fits a 1 – 1/4″ receiver, and comes with all mounting hardware and the drawbar, with pin and clip!  This great receiver hitch attaches right to the frame and the bumper, and is custom made to fit you Jetta 4-door Sedan!

Installation is estimated at about 40 minutes, and requires no drilling or cutting.  A Class I Hitch will support most light weight towing requirements – such as pulling your motorcycle, snowmobile, jet-ski, 4 wheeler, light watercraft, pop-up camper, or even a U-Haul trailer!  You will need to provide your own electrical and hitch ball. 

These are now available at Hitches4Less.com.  Stop by and take a look at store site - and enter Part # 60283 in the “SEARCH BY PART NUMBER” lookup at the bottom of the page. 

You can also buy this hitch at PerformanceParts4Less.com.  Use the hitch finder on the page by typing in the part number  where it says – KEYWORD SEARCH.

So when you’re ready to start back out with your boat or camper this spring, be sure to come visit us first – at Hitches4Less.com and get things rigged up right.  We can help you with all of your hitch and towing needs, including hitch balls, mounts, clips, & pins, hitch covers, electrical, wiring harnesses, extenders & adjusters, jack stands, and so much more.  Now is the time to start getting things ready.  Those fish will be waiting!

H4L

Hidden Hitch releases new Economical Class I Trailer Hitch for your 2005-2011 VW Jetta 4-door Sedan

Sunday, March 20th, 2011

Our friends at Hidden Hitch, a member of the Cequent Manufacturing Company, have just released another high quality, yet economical towing product with their new Class I – 1 1/4″ Receiver Hitch.  Specifically built for your 2005, 2006, 2007, 2008, 2009, 2010, or 2011 Volkswagen Jetta 4-door Sedan, this custom trailer hitch can handle a gross towing weight of 2,000 pounds, with a tongue weight of 200 pounds.  It fits a 1 – 1/4″ receiver, and comes with all mounting hardware and the drawbar, with pin and clip!  This great receiver hitch attaches right to the frame and the bumper, and is custom made to fit you Jetta 4-door Sedan!

Installation is estimated at about 40 minutes, and requires no drilling or cutting.  A Class I Hitch will support most light weight towing requirements – such as pulling your motorcycle, snowmobile, jet-ski, 4 wheeler, light watercraft, pop-up camper, or even a U-Haul trailer!  You will need to provide your own electrical and hitch ball. 

These are now available at Hitches4Less.com.  Stop by and take a look at store site - and enter Part # 60283 in the “SEARCH BY PART NUMBER” lookup at the bottom of the page. 

You can also buy this hitch at PerformanceParts4Less.com.  Use the hitch finder on the page by typing in the part number  where it says – KEYWORD SEARCH.

So when you’re ready to start back out with your boat or camper this spring, be sure to come visit us first – at Hitches4Less.com and get things rigged up right.  We can help you with all of your hitch and towing needs, including hitch balls, mounts, clips, & pins, hitch covers, electrical, wiring harnesses, extenders & adjusters, jack stands, and so much more.  Now is the time to start getting things ready.  Those fish will be waiting!

H4L

Draw Tite announces new Class I – 1 1/4″ Trailer Hitch for your 2011 Nissan Juke – AWD

Saturday, March 19th, 2011

The folks at Draw-Tite Hitch, a member of Cequent Manufacturing, have unveiled yet another quality towing product with their new Class I – 1 1/4″ Receiver Hitch.  Specifically built for your 2011 Nissan Juke AWD, this custom trailer hitch can handle a gross towing weight of 2,000 pounds, with a tongue weight of 200 pounds.  It fits a 1 1/4″ receiver, and comes with all mounting hardware and the drawbar, with pin and clip!

Installation is estimated at about 40 minutes, and requires no drilling or cutting.  A Class I Hitch will support most light weight towing requirements – such as pulling your motorcycle, snowmobile, jet-ski, 4 wheeler, light watercraft, pop-up camper, or even a U-Haul trailer!  You will need to provide your own electrical and hitch ball. 

These are now available at Hitches4Less.com.  Stop by and take a look at our page of Draw-Tite Hitches - and enter Part # 24867 in the “SEARCH BY PART NUMBER” lookup at the bottom of the page. 

You can also buy this hitch at PerformanceParts4Less.com.  Use the hitch finder on the page by typing in the part number  where it says – KEYWORD SEARCH.

So when you’re ready to start back out with your boat or camper this spring, be sure to come visit us first – at Hitches4Less.com and get things rigged up right.  We can help you with all of your hitch and towing needs, including hitch balls, mounts, clips, & pins, hitch covers, electrical, wiring harnesses, extenders & adjusters, jack stands, and so much more.  Now is the time to start getting things ready.  Those fish will be waiting!

H4L

Draw Tite unveils new Class I – 1 1/4″ Trailer Hitch for your 2010-2011 Volkswagen Golf Wagon

Saturday, March 19th, 2011

The folks at Draw-Tite Hitch, a member of Cequent Manufacturing, have unveiled yet another quality towing product with their new Class I – 1 1/4″ Receiver Hitch.  Specifically built for your 2010 or 2011 Volkswagen Golf Wagon ( Canada ), this custom trailer hitch can handle a gross towing weight of 2,000 pounds, with a tongue weight of 200 pounds.  It fits a 1 1/4″ receiver, and comes with all mounting hardware and the drawbar, with pin and clip!

Installation is estimated at about 40 minutes, and requires no drilling or cutting.  A Class I Hitch will support most light weight towing requirements – such as pulling your motorcycle, snowmobile, jet-ski, 4 wheeler, light watercraft, pop-up camper, or even a U-Haul trailer!  You will need to provide your own electrical and hitch ball. 

These are now available at Hitches4Less.com.  Stop by and take a look at our page of Draw-Tite Hitches - and enter Part # 24866 in the “SEARCH BY PART NUMBER” lookup at the bottom of the page. 

You can also buy this hitch at PerformanceParts4Less.com.  Use the hitch finder on the page by typing in the part number  where it says – KEYWORD SEARCH.

So when you’re ready to start back out with your boat or camper this spring, be sure to come visit us first – at Hitches4Less.com and get things rigged up right.  We can help you with all of your hitch and towing needs, including hitch balls, mounts, clips, & pins, hitch covers, electrical, wiring harnesses, extenders & adjusters, jack stands, and so much more.  Now is the time to start getting things ready.  Those fish will be waiting!

Curt releases new Multi Function Sockets – with Backup Alarms – for your towing needs

Saturday, March 19th, 2011

Curt Manufacturing, in their never-ending mission to provide the very best in trailer hitches and towing accessories, has just released a new Multi-Function Socket – with a Backup Alarm.  It replaces the OEM 7-way socket version, with a 7-way round RV – AND – a 4-way Flat.  How sweet is that?!!!

There is a universal style available, and you can get them specificaly for the following makes:

  • Part # 57100  -  comes with a DODGE plug
  • Part # 57101  -  comes with a plug to fit CHEVY or FORD
  • Part # 57102  -  comes with a plug to convert from a  4-way Flat socket

These are now available at Hitches4Less.com.  Visit our selection page of Curt Hitches - and enter the Part # in the “SEARCH BY PART NUMBER” lookup at the bottom of the page. 

You can also buy this hitch at PerformanceParts4Less.com.  Use the hitch finder on the page by typing in the part number  where it says – KEYWORD SEARCH.

So when you’re ready to start back out with your boat or camper this spring, be sure to come visit us first – at Hitches4Less.com and get things rigged up right.  We can help you with all of your hitch and towing needs, including hitches, hitch balls, mounts, clips, & pins, hitch covers, wiring harnesses, extenders & adjusters, jack stands, and so much more.  Now is the time to start getting things ready.  It’s starting to warm up again!